Pro Xp Waterborne Electrostatic Spray Guns
Pro Xp水性噴槍是採用隔離系統噴塗水性材料的理想選擇，有空氣噴塗，空氣輔助型號和噴塗脫模材料的獨特型號。
外部充電的水性空氣噴槍可降低材料和環境成本，而無靜電隔離系統的費用和限制。
Pro Xp空氣噴塗：使用包括WB100的隔離系統進行低壓噴塗。
Pro Xp Air-Assist：用於包括WB3000在內的隔離
外部充電的水性空氣噴槍可降低材料和環境成本，而無靜電隔離系統的費用和限制。
噴塗導電水性流體–無需隔離系統
水性材料在噴槍中保持接地，並藉助探針在靜電噴槍的尖端充電。
兩個探頭選項可滿足不同的需求。 長探針可提供最佳的傳輸效率和包裹性。 較短的探頭用於薄型靜電充電。
智能控件可幫助您分析性能，適應電壓需求並輕鬆排除故障。
| Electrostatic Air Spray Waterborne Guns | |
| Maximum Working Fluid Pressure | 0.7 MPa, 7.0 bar |
| Maximum Working Air Pressure | 0.7 MPa, 7.0 bar |
| Minimum Air Pressure at Gun Inlet | 0.32 MPa, 3.2 bar |
| Maximum Fluid Operating Temperature | 48°C |
| Short Circuit Current Output | 125 microamperes |
| Voltage Output Energy | 0.35 J with fluid hose 24M733 installed. L60T17 and L60T18: 60 kV. L60M17, L60M18, and L60M19: 30–60 kV |
| Sound Power (measured per ISO Standard 9216) | at 0.28 MPa, 2.8 bar: 90.4 dB(A) at 0.7 MPa, 7.0 bar: 105.4 dB(A) |
| Sound Pressure (measured 1 m from gun) | at 0.28 MPa, 2.8 bar: 87.0 dB(A) at 0.7 MPa, 7.0 bar: 99.0 dB(A) |
| Air Inlet Fitting | 1/4 npsm(m) left-hand thread |
| Fluid Inlet Fitting | Custom inlet for Graco waterborne fluid hose. |
| Isolation Enclosure Air Inlet Fitting | 1/4 npt |
| Isolation Enclosure Fluid Inlet Fitting | 10 mm OD tube fitting |
| Wetted Parts | Gun: Stainless Steel, PEEK, UHMWPE, Fluoroelastomer, Acetal, Nylon, Polyethylene, Tungsten Wire. Waterborne Fluid Hose: PTFE. Suction Tube: Polyethylene, Stainless Steel. Triton Pump: See manual 309303. |