Merkur 喷塗機
適當的壓力和流量，滿足您所有噴塗需求。新款改良型 Merkur 精飾型噴塗機擁有四種空氣馬達規格和 13 種不同型號供您選擇，可提高生產率、降低費用、減少排放以及提供高品質的出色、穩定的塗層質量。 Merkur 噴塗機經過時間的驗證，優於同類的其他泵且使用壽命更長。
採用市場上最新技術的空氣馬達
耗氣量低，可提高效率
消音器可降低運行噪音
外置氣閥使檢修和在線更換變得輕鬆容易，可將停工時間降至最低
操作控制面板位於與操作員同高，易於設置和監視
封閉式喉部密封圈和活塞桿保護塗料和濕杯免受污染，且可方便拆下以作查看和檢修.
| Merkur Displacement Pumps | |
| Maximum Operating Temperature | 71°C |
| Stroke Length | 64 mm |
| Wetted Parts | Stainless Steel, Tungsten Carbide, UHMWPE, PTFE |
| Maximum Working Fluid Pressure | |
| Model LW025A | 207 bar, 20.7 MPa |
| Model LW050A | 310 bar, 31.0 MPa |
| Model LW075A | 331 bar, 33.1 MPa |
| Model LW100A | 248 bar, 24.8 MPa |
| Model LW125A | 200 bar, 20.0 MPa |
| Model LW150A | 165 bar, 16.5 MPa |
| Fluid Inlet Size | |
| Model LW025A | 1/2 npt |
| Model LW050A, LW075A, LW100A | 3/4 npt |
| Model LW125A, LW150A | 1 npt |
| Fluid Outlet Size | |
| Model LW025A, LW050A, LW075A, LW100A | 3/8 npt |
| Model LW125A | 1/2 npt |
| Model LW150A | 3/4 npt |
| Merkur Heated Spray Packages | |
Metric | |
| Maximum fluid working pressure | See Models table on page 5 |
| Maximum pump air inlet pressure | 0.7 MPa, 7.0 bar |
| Maximum gun working pressure | 0.7 MPa, 7.0 bar |
| Ratio | See Models table on page 5. |
| Ambient air temperature range | (2°C–49°C) |
| Maximum fluid temperature | (71°C) |
| Sound data | See Technical Data in air motor manual 312796 |
| Wetted parts | Displacement pump: Stainless steel, tungsten carbide with 6% nickel, UHMWPE, PTFE. Spray gun: See Manual 3A0149 (AA guns) or Manual 312145 (XTR gun). Fluid hoses: nylon. Suction assembly: stainless steel, nylon. Fluid filter: See Manual 307273. Heater: Stainless steel. Back pressure regulator: See Manual 306860. Back pressure valve: See Manual 307892. Drain valve: stainless steel, nylon |